Description
Draco Bikes Custom Built 26″ Chromag Monk dirt jumper
The Monk features Chromag’s unique stainless steel horizontal dropout system for minimal complications with single-speed/disc brake setup. Custom chain stays paired with dedicated geometry offer you a light and incredibly stiff rear triangle on a low slung steel weapon.
The Monk now features Chromag’s chain tug integrated into the dropout on both sides.
FRAME SPECS:
Chromag Monk Dirt Jump Frame Specs:
Almost all Chromag frames are made from quality 4130 chromoly steel tubing. Chromoly is an abbreviation for chromium-molybdenum indicating the materials that the steel is alloyed with.
The added chromium helps increase the steels hardenability and also provide some corrosion resistance. The molybdenum helps to increase the toughness of the steel.
It has a high tensile strength but is also malleable which is what gives our frames their notorious ride quality and feel. Chromoly is often used when more strength is required than that of mild carbon steel.
It falls under the AISI (American Iron & Steel Institute) 41XX designations which is where the “41” comes from. The “30” indicates it contains approximately 0.30% carbon by weight.
Chromoly is much stronger than traditional 1020 steel and it has a higher strength to weight ratio and high tensile strength, which means we can use less material and achieve a product that can withstand the abuse that riders love to throw at it.
FRAME DETAILS:
HEAD TUBE BADGE: Your bike is special. The head tube badge is the finishing touch so Chromoly’s always made a point of taking the time to do something interesting with it. Their head tube badges have changed over the years and are an indication of the time each bike was made. Whether it’s a cast bronze, or polished stainless steel, water cut aluminum or a 3D CNC carving, each one represents their commitment to detail.
MONK FRAME GEOMETRY: long
STACK: 21.8”
REACH: 17.1”
EFFECTIVE TOP TUBE: 22.4”
HEAD TUBE: 3.7”
WHEEL BASE: 41.0”
BB DROP: 1.9”
BB HEIGHT: 12.5”
STAND OVER: 24.3”
CHAIN STAY: 15.0”
SEAT TUBE: 12.1”
HEAD ANGLE: 70º
SEAT ANGEL: 76º
WHEEL SIZE: 26”
Manitou Circus Expert Tapered 26” fork, 100mm:20mm and 100mm models can be reduced to 80mm travel using included spacers
- 20mm hex axle provides superior torsional stiffness
- Absolute+ cartridge platform oil damping system: specifically tuned for Dirt Jumping
- Forged I-beam style crown: bigger, stronger, and more durable
- Alloy steerer, and 32mm aluminum stanchions
Halo Chaos 26” Dirt Jump Front Wheel, Non-Disc – With 110×20 Endcaps
Halo Chaos 26” Dirt Jump SupaDrive DJD Rear Wheel:
- Used and loved world over by riders and endorsed by international professionals Sam Pilgrim, Matt Jones and Jordie Lunn, Chaos wheels are at the pinnacle of dirt jump wheels that stand up to the hardest of use
- Chaos rear dirt jump wheels are built around an 11 tooth mini thread on cog, single speed DJD rear hubs, with the option of an 120 point pick up Supadrive or a standard 3 pawl drive
- Chaos Front wheels use the brakeless DJ Wideboy hub
- Front Standard: 100 x 15mm Thru, 110x20mm and 100 x 9mm QR endcaps available; Rear Standard: 135mm x m10 bolt in axle system with 14mm adaptors
Schwalbe Table Top Tires, 26 x 2.25” Addix
- Lightweight Street/Dirt Jump tire for front/rear designed by Timo Pritzel
- Addix compound optimized for durability and grip
- Performance line 67 tpi casing
Cane Creek 40-Series Headset, ZS44/28.6 l ZS56/40
- The 40-Series is the workhorse of Cane Creek’s headset line-up and incorporates all the features necessary for a durable, lightweight and long-lasting headset while offering the perfect balance of performance, durability and value
- Contoured and relieved 6061-T6 aluminum for minimized weight and maximized strength with split-lip sealed stainless steel bearings
- Low friction, dual-seal crown race and top cover provides maximum sealing from contaminants, plus a captured compression ring design for carbon steerer compatibility (Interlok spacer compatible, sold separately)
- Cane Creek Integrated 41.0mm ID (36×45), Campy Hiddenset 42.0mm ID (45×45) , ZS (ZeroStack), or EC (traditional, External Cup) available for 1″, 1-1/8″ and tapered steerers
- Carbon indicates a carbon top cover on upper cup
Chromag HiFi V2 Stem 31.8mm clamp, 31mm extension – Red
- Light, yet extremely strong Enduro and Freeride stem
- Structurally optimized CNC machined 6061-T6 aluminum
- 4-bolt face plate, 2-bolt steerer clamp. 210g
Chromag Fubars OSX Black/Red Anodized 31.8mm clamp, 780mm wide, 25mm rise
- Super-wide Enduro/Freeride/Downhill riser bar
- Made with custom drawn double butted 7075-T6 aluminum
- Super thin diameter grip with dimpled pattern for high intensity riding
- Aluminum clamps secure the grip on both ends for twist-free performance
- Brandon Semenuk Slopestyle and Dirt Jump model with synthetic top
- Features a silicone print leg-grab area with subtle flares in the rearward body
Chromag Dolomite Seatpost 31.6 – Black
- 3D forged one piece shaft and clamp base with robust cradle and top clamp
- Turned CNC finish with a degree of texture for a positive clamp grip
- Tough 6mm hardware, 0.5″ clamp offset. 305g (27.2mm)
Race Face Atlas-Cinch Crank Arms (68/73) 170mm – Red
- The benchmark in Freeride and DH rated cranks, now lighter and stiffer
- Forged 7050 aluminum crank with web bracing to cut out unnecessary material
- Industry standard 30mm spline interface, CNC machined from 7050 alloy
- Future-proof proprietary Cinch system offers interchangeable spiders, limitless ring combinations, swappable width 30mm alloy spindles, and full compatibility across all relevant frame standards
- Made in Canada. 792g with BB (175mm with 36t ring)
Race Face 30mm Bottom Bracket Cup Set, BSA 68/73mm
Race Face Cinch Direct Mount Steel Chainring, 30T
- Steel, the ultimate material for long lasting chainrings
- Direct mount with splines to fit Race Face Cinch system splined cranks
- Narrow-wide teeth prevent chain drop, updated tooth profile runs quieter
Chromag SYNTH Composite Pedals – Black
- An injection molded, nylon reinforced platform that is light, impact resistant and won’t break the bank
- Constructed with the same precision axle and bearing system as the Contact and Scarab models for smooth running and long durability
- Fully serviceable and re-buildable
- Large platform with true concave shape and replaceable pins.
- 110mmx105mm, 380g per pair
TRP Slate T4 Disc, A3 Caliper and 2-Piece 6-Bolt Rotor – 160mm
- Intended use is Enduro/All Mountain/Trail
- 4-piston forged caliper w/ 2-16mm & 2-14mm stainless pistons
- Aaron Gwin designed alloy lever blade
- Tool-free reach adjustment
- EZ-Plug system: pre-bled and plugged at both ends of the 1900mm hose (F & R); extra olive and barb included
To purchase a customized complete build, please contact us directly. We are happy to answer all your questions about our bikes and products. Call: (561) 255-7209 or Email: info@dracobikes.com
Reviews
There are no reviews yet.